5
PRIORITY WATCH
5-9
VFO scan and a priority channel (Continued)
DuringaPrioritywatch4.
Checks the selected priority channel every 5 seconds,
while VFO scanning.
Example:
Checks Memory channel “000” while VFO scanning
Appears
Checks the Memory channel “000” every 5 seconds.
Appears
Blinks
Example:
Checks Bank channel “A00” while VFO scanning
Appears Appears
Blinks
Checks the Bank channel “A00” every 5 seconds.
Example:
Checks Call channel “C0 (144)” while VFO scanning
Appears Appears
Blinks
Checks the Call channel “C0 (144)” every 5 seconds.
Automatically selects the priority channel.
Remains in the VFO mode.
Example: For a Memory channel
Blinks
Whenasignalisreceived.5.
•When“ON”isselected.
When a signal is received on the priority channel,
the channel is automatically selected.
The “PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan. (p. 12-14)
•When“Bell”isselected.
When a signal is received on the priority channel,
a beep sounds and the “S” icon blinks. The VFO
scan resumes.
Blinks
Blinks
To Next Page
Loading...
