Icom ID-5100A

7
D-STAR OPERATION <ADVANCED>
7-4
Message operation (Continued)
D Transmittingamessage
You can transmit a pre-entered text message by push-
ing [PTT]. First, select a TX message which also turns
ON the message transmission function.
Touch [MENU]. q
Touch “TX Message.” w
(My Station > TXMessage)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
Touch the number to select message memory num- e
ber 1 to 5. (Example: 1: JAPAN >TOM)
• To turn OFF the message transmission function, select
“OFF.”
Touch [MENU]. r
• Closes the Menu screen.
• The message is transmitted along with your voice signal.
• The message is transmitted each time you push [PTT].
• The message is automatically transmitted every 30 sec-
onds during continuous transmission.
RXcallsignandmessagedisplay
As the default, the received call sign and message are
automatically displayed and scrolled on the LCD.
To not display and scroll them, set the “RX Call Sign”
item to “OFF” in the Menu screen.
(Display > RXCallSign)
The received call sign and message
are displayed and scrolled.
Previous view