Icom ID-5100A - D Irectly Inputting (UR)

6
D-STAR OPERATION <BASIC>
6-28
“TO” (Destination) setting (Continued)
D Directlyinputting(UR)
The destination station call sign can be directly en-
tered.
Example: Directly enter the call sign “JM1ZLK.”
Foryourreference:
If the programmed call sign is
duplicated in “Your Call Sign”
memory, the name is displayed.
(Only when the name has been
programmed.)
Touch [DR]. q
Check whether or not “TO” is selected. w
• If “TO” is not selected, touch the “TO” eld.
Touch the “TO” field. e
• Opens the “TO SELECT” screen.
Touch “Direct Input (UR).” r
• Opens the “DIRECT INPUT (UR)” screen.
Touch the desired keypad to t select the desired charac-
ter or symbol.
(Example: J)
• A to Z, 0 to 9, / and (Space) are selectable.
• Touch “ab⇔12” to toggle between the Alphabet entry and
Number entry modes.
• Touch [CLR] to delete the selected character, symbol or
number.
• Touch “SPACE” to enter a space.
• Touch [QUICK], and then touch “Switch to Tenkey” to
switch the keyboard type.
Touch [ y ] to move the cursor backwards, or touch
[] to move the cursor forwards.
Repeat steps u t and y to program a call sign of
up to 8 characters, including spaces, and then touch
[ENT].
(Example: First, J, then M, then 1, then Z, then L,
then K.)
• The transceiver returns to the DR screen, and “JM1ZLK”
is displayed in “TO.”
• After programming, you can correct the call sign in the
“DIRECT INPUT (UR)” screen.
• The programmed call sign remains on the “DIRECT IN-
PUT (UR)” screen, until you enter a new call sign.
Previous view