Icom ID-5100A

6
D-STAR OPERATION <BASIC>
6-27
“TO” (Destination) setting (Continued)
D UsingtheTXHistory
The TX History stores the name and/or call sign of up
to 20 “TO” (Destination) settings that were used when
you made the calls.
NOTE: Until you make a call in the DV mode, you
cannot select “TO” (destination) from the TX History.
Example: Select the “Hamacho” repeater in the TX
History.
Touch [DR]. q
Check whether or not “TO” is selected. w
• If “TO” is not selected, touch the “TO” eld.
Touch the “TO” field. e
• Opens the “TO SELECT” screen.
Touch “TX History.” r
• Opens the “TX HISTORY” screen.
Touch the destination name or call sign. t
(Example: “Hamacho”)
• The transceiver returns to the DR screen, and “Hama-
cho” is displayed in “TO.”
The Sub name is displayed
when a repeater is selected.
Foryourreference:
If you touch [QUICK] on
the TX HISTORY screen,
you can add the selected
TX HISTORY data to
memory, or delete it from
there.
Previous view