5
PRIORITY WATCH
5-11
DuringaPrioritywatch4.
Checks the selected priority channel every 5 seconds,
while VFO scanning.
Example: Checks the Memory channels every 5 seconds while VFO scanning
Appears
Appears
Blinks
Example: Checks the Bank channels every 5 seconds while VFO scanning
Appears
Appears
Blinks
VFO scan and a Memory/Bank scan (Continued)
Whenasignalisreceived.5.
•When“ON”isselected.
When a signal is received on the priority channel,
the channel is automatically selected.
The “PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan. (p. 12-14)
•When“BELL”isselected.
When a signal is received on the priority channel, a
beep sounds and the “S” icon blinks.
The VFO scan resumes.
Automatically selects the Memory channel.
Remains in the VFO mode.
Example: For a Memory scan
Blinks
Blinks
Blinks
Blinks
To Next Page
Loading...
