Icom ID-5100A

13
OTHER FUNCTIONS
13-15
D CloningfromaPCusinganSDcard
You can clone transceivers from a PC using an SD
card.
Set memory content, Menu item settings and repeater
list in the CS-5100 cloning software (contained in the
CD), and save them in an “icf” file format. Copy the “icf”
file to the “Setting” folder in the “ID-5100” folder of the
SD card.
•SDcardconguration
Insert the SD card that includes the “icf” file, then load
it to complete the cloning.
D CloningfromaPCusinganoptionalcloningcable
You can clone with the CS-5100 (contained in the CD)
and the optional OPC-2218LU, OPC-1529R or OPC-
478UC.
See the CS-5100 instruction manual (contained in the
CD) and the OPC-2218LU or OPC-478UC instruction
manual (downloaded from the Icom WEB site; http://
www.icom.co.jp/world/)
NOTE:
When using the OPC-2218LU or OPC-1529R, set
the “DV Data TX” item to “PTT,” before cloning.
If “Auto” is set, the transceiver may automatically
transmit with the cloning data.
(DV Set > DV Data TX)
Cloning function (Continued)
ID-5100
Gps
Reply
Setting
Voice yyyymmdd
yyyymmdd
QsoLog
RxLog
VoiceTx
Csv
GpsMemory
YourMemory
RptList
市販のケーブル
to the Card
reader
to the Card slot
Cloning cable
Click
Double-click
Copy the
“icf” file.
Double-click
市販のケーブル
to the Card
reader
to the Card slot
Cloning cable
•Connections
Previous view