Icom ID-5100A

6
D-STAR OPERATION <BASIC>
6-7
Registeryourcallsignatagatewayrepeater
Ifneeded,askthegatewayrepeateradministrator
forcallsignregistrationinstructions.
To use the Internet, you must register your call sign with
a repeater that has a gateway, usually one near your
home location.
Abouttheregistrationprocessdescribed:
This section describes the call sign registration pro-
cess at a repeater that is connected to the US Trust
server.
There are other systems as well, and they have their
own registration process. For information on how to
register on one of them, contact the administrator of
a repeater that uses the alternate system.
Accessthecallsignregistrationscreen1.
Access the following URL to find the gateway repeat- q
er closest to you.
http://www.dstarusers.org/repeaters.php
Click the call sign of the repeater that you want to w
register to.
Click the “Gateway Registration URL:” link address. e
The “D-STAR Gateway System” screen appears. r
Click [Register] to start the New User registration.
Click
Registeryourcallsign2.
Follow the registration instructions found there. t
When you receive a notification from the administra- y
tor, your call sign registration has been approved.
Registeryourpersonalinformation3.
After your registration is approved, log in your per- u
sonal account with your registered call sign and
password.
Click
RegisteryourD-Starequipment4.
Register your D-STAR equipment information. i
Ask the gateway repeater administrator for details.
When your registration is complete, log out of your o
personal account, and start using the D-STAR net-
work.
NOTE: You must register your D-STAR equipment
BEFORE you can make calls through the gateway.
Previous view