Icom ID-5100A

15
Bluetooth
®
OPERATION
15-17
InitializingtheinstalledBluetooth
®
unit
You can initialize the installed UT-133 Bluetooth
®
u n i t .
You should initialize the unit if you have trouble during
Bluetooth
®
operation.
When you do a partial reset or all reset, the Bluetooth
®
settings returns to their factory defaults. However, the
device name and pairing/connection information re-
main.
Touch [MENU]. q
Touch “Initialize Bluetooth Device.” w
(Bluetooth Set > InitializeBluetoothDevice)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
Touch [YES]. e
• Closes the Menu screen.
• Resets the installed UT-133 Bluetooth
®
u n i t ’s set-
tings to their factory defaults, and returns to the
standby display.
Previous view