Icom ID-5100A - Entering New Information into the Repeater List; D Required Items for the Communication Cases; Latitude 34.764667

7
D-STAR OPERATION <ADVANCED>
7-21
D Requireditemsforthecommunicationcases
Repeater list
contents
Usedasan
access repeater
Usedasadestina-
tionrepeater
UsedforDV
simplex
UsedasanFM
repeater
UsedforFM
simplex
TYPE DV Repeater DV Repeater DV Simplex FM Repeater FM Simplex
NAME
    
SUB NAME
    
CALL SIGN
● ●
N/A

N/A
GW CALL SIGN
●
(For a Gateway call)
●
N/A N/A N/A
GROUP
    
USE(FROM)
●

●
 
FREQUENCY
●

● ● ●
DUP
●

N/A

N/A
OFFSET FREQ
●

N/A

N/A
MODE N/A N/A N/A
 
TONE N/A N/A N/A
 
RPT TONE N/A N/A N/A
 
POSITION
    
LATITUDE
    
LONGITUDE
    
UTC OFFSET
    
●: Must be entered
: Possible to enter
N/A: Not Available
This section describes how to manually enter new re-
peater information into the repeater list.
The required setting items differ, depending on your
communication usage. Be sure to confirm the required
items, as shown below.
NOTE: To enter repeater information into the repeat-
er list, the repeater’s call sign MUST be entered first.
EnteringnewinformationintotheRepeaterList
Previous view