Icom ID-5100A

5
PRIORITY WATCH
5-12
Afrequencyin“FROM”ontheDRscreenandaprioritychannel
Settheprioritychannel1.
•ToselectaVFOfrequency
q Touch the Memory channel number.
• Opens the Mode setting window.
w Touch [VFO].
e Set the receive frequency and mode.
•ToselectaMemorychannel
q Touch the Memory channel number.
• Opens the Mode setting window.
w Touch [MR].
e Rotate [DIAL] to select the Memory channel you
want to watch.
•ToselectaBankchannel
q Touch the Memory channel number.
• Opens the Mode setting window.
w Touch [MR].
e Rotate [DIAL] to select the Bank channel you
want to watch.
How to select the Memory and Bank:
z In the Memory mode, touch [QUICK].
x Touch “Bank Select.”
• The Bank list is displayed.
c Touch a desired bank.
• If “OFF” is selected, cancel the bank selection.
•ToselectaCallchannel
q Touch the Memory channel number.
• Opens the Mode setting window.
w Touch [CALL].
e Rotate [DIAL] to select the Call channel you want
to watch.
Selecttherepeaterorsimplexfrequencyinthe2.
DRscreen
q Touch [DR].
• Turns ON the DR function.
w Touch the “FROM” field.
e Rotate [DIAL] to select the desired repeater or a
simplex frequency.
Continued on the next page. ☞
Checks the selected priority channel every 5 seconds,
while receiving a repeater or simplex frequency in
“FROM” of the DR screen.
Previous view