Icom ID-5100A

12
MENU SCREEN
12-42
<FM Repeater>
TYPE FM repeater
NAME
FM repeater name of up to 16 alphanu-
meric characters
SUB NAME
FM repeater sub name of up to 8 alpha-
numeric characters
CALL SIGN FM repeater call sign
GROUP
Repeater group where the repeater is
assigned
USE(FROM)
Select whether or not to use the FM re-
peater as an access repeater (FROM) in
the DR screen
FREQUENCY Operating frequency of the FM repeater
DUP Duplex setting to use the FM repeater
OFFSET FREQ
Frequency offset to use the FM repeat-
er
MODE Receiving mode of the FM repeater
TONE Tone function setting of the FM repeater
REPEATER TONE
FM repeater tone frequency (Tone En-
coder) setting of the access repeater.
POSITION
Position data accuracy level (“None,”
“Approximate” or “Exact”)
LATITUDE* Latitude position of the FM repeater
LONGITUDE* Longitude position of the FM repeater
UTC OFFSET
Time difference between UTC (Universal
Time Coordinated) and the local time
<FMSimplex>
TYPE FM Simplex
NAME
Enter the desired name of up to 16 al-
phanumeric characters
SUB NAME
Enter the desired sub name of up to 8
alphanumeric characters
GROUP Set the desired repeater group
USE(FROM)
Select whether or not to use the access
repeater (FROM) in the DR screen
FREQUENCY Frequency to operate simplex
MODE Receiving mode for simplex FM
TONE Tone function setting for simplex FM
REPEATER TONE
FM simplex tone frequency (Tone En-
coder) setting of the access repeater
POSITION
Position data accuracy level (“None,”
“Approximate” or “Exact”)
LATITUDE* Latitude position of the station
LONGITUDE* Longitude position of the station
UTC OFFSET
Time difference between UTC (Universal
Time Coordinated) and the local time
DV Memory items (Continued)
* Appears when POSITION is set to “Approximate” or “Ex-
act.”
Previous view