Icom ID-5100A

7
D-STAR OPERATION <ADVANCED>
7-24
Settingthetone13.
When ‘2. Selecting the communication type’ is set to
“DV Repeater” or “DV Simplex,” this item does not
appear.
#8 Touch “TONE.”
• Enters the tone setting mode.
#9 Touch “TONE.”
Selectingtherepeatertone14.
• When ‘2. Selecting the communication type’ is set
to “DV Repeater” or “DV Simplex,” this item does
not appear.
• This setting is required when ‘13. Setting the tone’
is set to “TONE.”
$0 Touch “Repeater Tone.”
• Enters the repeater tone setting mode.
$1 Touch [+] or [–] to select the repeater tone.
$2 Touch [].
Selectingthepositiondataaccuracylevel15.
When the Near Repeater Search function is not
used, or the distance between your position and a
repeater is not displayed, select “OFF,” and go to ‘18.
Setting the UTC offset.’
$3 Touch “POSITION.”
$4 Touch the position data accuracy level.
• None: Select when the repeater has no position
data.
• Approximate: Select when the programmed position data
is approximate.
• Exact: Select when the programmed position data
is exactly correct.
Enteringthelatitude16.
This item appears only when ‘15. Selecting the posi-
tion data accuracy level’ is set to “Approximate” or
“Exact.”
$5 Touch “LATITUDE.”
• Enters the latitude data edit mode.
$6 Touch the desired number to enter the latitude.
• Touch [CE] to delete the selected number.
• Touch [] to move the cursor backwards, or touch [] to
move the cursor forwards.
• Touch [N/S] to toggle between N (North latitude) and S
(South latitude).
$7 After entering, touch [ENT].
$8 Touch [√].
Enteringthelongitude17.
This item appears only when ‘15. Selecting the posi-
tion data accuracy level’ is set to “Approximate” or
“Exact.”
$9 Touch “LONGITUDE.”
• Enters the longitude data edit mode.
%0 Touch the desired number to enter the longitude.
• Touch [CE] to delete the selected number.
• Touch [] to move the cursor backwards, or touch [] to
move the cursor forwards.
• Touch [E/W] to toggle between E (East longitude) and W
(West longitude).
%1 After entering, touch [ENT].
SettingtheUTCoffset18.
UTC (Universal Time Coordinated) offset is the time
difference between UTC and repeater local time. This
is a useful function to know the local time of the des-
tination repeater before you make a call. (p. 12-62)
%2 Touch “UTC OFFSET.”
• Enters the UTC offset edit mode.
%3 Touch [+] or [–] one or more times to set the time dif-
ference between UTC and the local time.
• If desired, touch the UTC offset entry eld for 1 second to
open the window, and then touch “Clear” to clear the UTC
offset.
%4 After entering, touch [].
Savingtherepeaterlist19.
%5 Touch “<<Add Write>>.”
%6 Touch [YES].
• The entered contents are saved to the repeater list, and
the display returns to the RPT LIST screen.
Entering new information into the Repeater List
Tocanceltheentereddata:
Touch [] to display “Cancel edit?” window.
Touch [YES] to cancel entry and return to the “RPT
LIST” screen.
Entering new information into the repeater list (Continued) D
Previous view