12
MENU SCREEN
12-11
Menu items and Default settings (Continued)
NOTE:The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
Bluetooth Device Information Shows the optional UT-133 Bluetooth
®
u n i t informa-
tion.
Initialize Bluetooth Device Selects to reset the optional UT-133
Bluetooth
®
u n i t .
Others Set other options.
Information
Voltage Shows the voltage of the external DC power source.
Version Shows the transceiver’s firmware version number.
Clone
Clone Mode Reads or writes the CS-5100 data from or to the PC,
and/or to receive data from a Master transceiver.
Repeater Mode*
<<Repeater Mode>> Selects the Repeater mode.
Hang Up Time OFF or ON Selects the hangup time to cancel the transmission.
Touch Screen Calibration Adjusts the touch screen.
Reset
Partial Reset Returns all settings to their defaults, without clearing
the memory contents, call sign memories or repeater
lists.
All Reset Clears all programming and memories, and return all
settings to their defaults.
*Does not appear, depending on the transceiver version.
To Next Page
Loading...
