Icom ID-5100A

12
MENU SCREEN
12-18
File Split (Default:ON)
Voice Memo > QSO Recorder > Recorder Set > File
Split
Turn the File Split function ON or OFF.
• OFF: When the recording starts, a new le is automat-
ically created in the folder on the SD card. The
voice audio is continuously recorded into the
file, even if transmission and reception, or the
squelch status (open and close) is switched.
If the file size exceeds 2 GB, a new file is au-
tomatically created in the same folder, and the
voice audio is recorded there.
• ON: When the recording starts, a new le is automat-
ically created in the folder of the SD card. Dur-
ing recording, and if transmission and reception,
or squelch status (open and close) is switched,
a new file is automatically created in the same
folder, and the voice audio is saved into the new
one.
PTT Auto REC (Default:OFF)
Voice Memo > QSO Recorder > Recorder Set > PTT
Auto REC
Turn the PTT Automatic Recording function ON or
OFF.
The transmission from the Bluetooth
®
VOX function
and CI-V command also starts recording.
• OFF: Turns OFF the function.
• ON: The recording automatically starts when [PTT] is
pushed.
The recording will stop when:
• No signal is transmitted for 10 seconds after releas-
ing [PTT].
• No signal is received for 10 seconds after releasing
[PTT].
- When transceiver receives a signal in 10 seconds
after releasing [PTT], the recording automatically
starts.
- In the AM mode, and when you operate with the
squelch opens, the recording automatically stops
after 10 minutes.
• Frequency or operating mode is changed after re-
leasing [PTT].
SkipTime (Default:10sec)
Voice Memo > QSO Recorder > Player Set > Skip Time
Select the SkipTimer to 3, 5, 10 or 30 seconds to re-
wind or skip forward for this set period when you push
the fast-rewind or fast-forward key while playing the re-
corded voice audio.
• See “Playing back the recorded audio” for forwording or re-
winding details. (p. 10-3)
DV Auto Reply
Voice Memo > DV Auto Reply
Up to 10 seconds of audio can be recorded for the au-
tomatic reply function.
Be sure to insert an SD card into the transceiver.
• See “Automatic Reply function” for details. (p. 7-12)
Voice Memo items (Continued)
Previous view