Icom ID-52A

9
MEMORY OPERATION
9-6
Copying Memory content to the VFO
It is convenient when you want to operate on a
channel frequency near a Memory or Call channel�
Example: Copying Memory Channel 11 in Group 01
to the VFO�
1� Push [MR] to enter the Memory mode�
L For only the ID-52A, pushing [MR] each time selects
the Memory and Weather Channel modes�
2� Rotate [DIAL] to select Channel 11 in Group 01�
L To select a Memory Group, push [QUICK], and then
select “Group Select�”
3� Hold down [MW] for 1 second�
• A short and a long beep sound�
4� Select “Copy to VFO�”
5� Select “YES�”
• Beeps sound and copies the selected Memory
contents to the VFO, then returns to the VFO mode�