2
USING a microSD CARD
2-3
Saving with a different file name
[MENU] > SET > SD Card > Save Setting
1� Push [MENU]�
2� Select “SD Card” in the “SET” menu�
3� Select “Save Setting�”
4� Select “<<New File>>�”
5� Hold down [CLR] to delete the characters�
6� Enter a file name, and then push [ENT]�
L See page iii on how to enter characters�
7� Select “YES�”
• While saving, a progress bar is displayed� When saving
is completed, the SD CARD screen is displayed�
L To exit the MENU screen, push [MENU]�
To Next Page
Loading...
