Icom ID-52A

5
D-STAR OPERATION (ADVANCED)
5-11
“TO” (Destination) setting
DUsing TX History
TX History saves the repeater and station name and
call sign of up to 20 “TO” (Destination) settings used
when you made the calls�
NOTE: Until you make a call in the DV mode, you
cannot select “TO” (destination) from the TX History�
Example: Selecting the “Kirkland (IA)” repeater in the
TX History�
1� Hold down [DR] for 1 second to display the DR
screen�
2� Push D-pad() to select “TO,” and then push [ENT]�
3� Select “TX History�”
4� Select a destination repeater�
The Sub name is
displayed when a
repeater is selected�
• Returns to the DR screen, and the selected repeater
name is displayed in “TO�”
DDirectly entering (UR)
The destination station call sign can be directly entered�
Example: Directly entering the call sign “JM1ZLK�”
1� Hold down [DR] for 1 second to display the DR
screen�
2� Push D-pad() to select “TO,” and then push [ENT]�
3� Select “Direct Input (UR)�”
4� Enter a call sign of up to 8 characters, including
spaces�
L See page iii on how to enter characters�
5� After entering, push [ENT]�
• Returns to the DR screen and the entered call sign is
displayed in “TO�”
L After entry, you can edit the call sign in the DIRECT
INPUT (UR) screen�
L The entered call sign remains on the DIRECT INPUT
(UR) screen until you enter a new call sign�
TIP: If the entered call sign is duplicated in the “Your
Call Sign” memory, the name is displayed�
(Only when the name has been entered�)
TIP: You can add the TX HISTORY data to memory,
or delete it from the TX HISTORY screen�
Push [QUICK], then select the option�