15
OTHER FUNCTIONS
15-7
Transmitting the DTMF code
DSelecting the DTMF transmit speed
You can select the DTMF transmit speed�
[MENU] > SET > DTMF/T-CALL > DTMF Speed
1� Push [MENU]�
2� Select “DTMF/T-CALL” in the “SET” menu�
3� Select “DTMF Speed�”
4� Select a transmit speed� (Default: 100ms)
L To exit the MENU screen, push [MENU]�
The image of transmitting the DTMF code
When “100ms” is selected,
the DTMF transmit speed
is fast�
When “500ms” is selected,
the DTMF transmit speed
is slow�
Pi, Po, Pa Pi–, Po–, Pa–
To Next Page
Loading...
