12
SET MODE
12-30
Sounds
Standby Beep (Default: ON (to me:Alarm/High Tone))
[MENU] > SET > Sounds > Standby Beep
Turns the Standby Beep function ON or OFF�
This function sounds a beep after a received signal
disappears, in the DV mode�
• OFF: Does not sound a beep after a received signal
disappears�
• ON: Sounds a beep after a received signal
disappears�
• ON (to me:High Tone):
Sounds a high pitched beep when a received
signal that is addressed to your call sign (MY)
disappears� When any other received signal
disappears, a regular beep sounds�
• ON (to me:Alarm/High Tone):
Sounds alarm (PiRoPiRoPiRo) when a
received signal that is addressed to your
call sign (MY) disappears� When any other
received signal disappears, a regular beep
sounds�
L The standby beep sounds even when “Key-Touch Beep”
is set to “OFF�”
L The standby beep output level depends on the “Beep
Level” setting�
Sub Band Mute (Default: OFF)
[MENU] > SET > Sounds > Sub Band Mute
Selects whether or not to mute the SUB band audio
signal while receiving on the MAIN band, and/or
sound a beep when a signal disappears on the SUB
band�
• OFF: Turns OFF the function�
• Mute: While receiving on the MAIN band,
the SUB band audio signal is muted�
• Beep: When a signal disappears on the
SUB band, a beep sounds�
• Mute & Beep: While receiving on the MAIN band,
the SUB band audio signal is muted�
When a signal disappears on the
SUB band, a beep sounds�
L When you set this item to “Beep” or “Mute & Beep,” a
beep sounds, even if no signal is received on the MAIN
band�
Time Set
DATE
[MENU] > SET > Time Set > Date/Time > DATE
Manually set the date to between 2020/01/01 and
2099/12/31�
L The day of the week is automatically set�
TIME
[MENU] > SET > Time Set > Date/Time > TIME
Manually set the time that is displayed at the top of the
screen� The time is displayed in the 24 hour format�
When “GPS Time Correct” is set to “Auto,” the GPS
receiver automatically sets the time by calculating the
received Universal Time of Coordinated (UTC) time
and “UTC Offset�”
GPS Time Correct (Default: Auto)
[MENU] > SET > Time Set > GPS Time Correct
Selects whether or not the time data is automatically
corrected by a received GPS sentence�
• OFF: Does not correct the time�
• Auto: Automatically corrects the time by calculating
the received UTC time and the “UTC Offset”
setting�
UTC Offset (Default: ±0:00)
[MENU] > SET > Time Set > UTC Offset
Sets the UTC offset time to between –14:00 and
+14:00�
Auto Power OFF (Default: OFF)
[MENU] > SET > Time Set > Auto Power OFF
Selects whether or not to automatically turn OFF the
transceiver after inactivity for this set period of time�
L “AUTO POWER OFF” is displayed and beeps sound
5 seconds before turning OFF the transceiver� If you
operate the transceiver during this period of time, the
Auto Power OFF timer is reset�
• OFF: Does not turn OFF the transceiver�
• 30/60/90/120min:
Turns OFF the transceiver after inactivity for
this set period of time�
To Next Page
Loading...
