Icom ID-52A

12
SET MODE
12-15
QSO/RX Log
QSO Log (Default: ON)
[MENU] > SET > QSO/RX Log > QSO Log
Selects whether or not to make a communication log
on a microSD card� The communication log is made
on the card, and saved in the “csv” format�
L This function requires a microSD card (User supplied)�
• OFF: The QSO Log function is OFF�
• ON: The transceiver makes a log on the microSD
card� The transceiver starts making a log
when you begin talking�
TIP:
• The folder name is automatically created, as
[ID-52\QsoLog]�
• The file name is automatically created, as shown in the
example below:
Log start date and time: 1st November 2021 15:30:00
File name: 20211101_153000�csv
• The log contents are not displayed on the transceiver�
• You can display the log contents on a PC�
RX History Log (Default: OFF)
[MENU] > SET > QSO/RX Log > RX History Log
Selects whether or not to make a DV mode’s receive
history log on a microSD card� The receive history log
is made on a microSD card, and saved in the “csv”
format�
L This function requires a microSD card (User supplied)�
• OFF: The RX History Log function is OFF
• ON: The transceiver makes a DV mode’s receive
history log on the microSD card� The
transceiver starts making a receive history log
when you finish talking�
TIP:
• The folder name is automatically created, as
[ID-52\RxLog]�
• The file name is automatically created, as shown in the
example below:
Log start date and time: 1st November 2021 15:30:00
File name: 20211101_153000�csv
• The log contents are not displayed on the transceiver�
• You can display the log contents on a PC�
Separator/Decimal (Default: Sep[,] Dec[�])
[MENU] > SET > QSO/RX Log > CSV Format >
Separator/Decimal
Selects the separator and the decimal character for
the CSV format�
L The default value may differ, depending on the
transceiver version�
• Sep [,] Dec [�]: Separator is “,” and Decimal is “�”
• Sep [;] Dec [�]: Separator is “;” and Decimal is “�”
• Sep [;] Dec [,]: Separator is “;” and Decimal is “,”
Date (Default: mm/dd/yyyy)
[MENU] > SET > QSO/RX Log > CSV Format >
Date
Selects the date format between “yyyy/mm/dd,”
“mm/dd/yyyy,” and “dd/mm/yyyy�”
(y: year, m: month, d: day)
L The default value may differ, depending on the
transceiver version�