9
MEMORY OPERATION
9-10
Inserting a blank channel
You can insert a blank channel between 2 Memory
channels� This function is convenient to organize your
memory channels�
Example: Inserting a blank channel between Channel
00 and 01 in Group 00�
[MENU] > MEMORY > Memory CH
1� Push [MENU]�
2� Select “MEMORY�”
3� Select “Memory CH�”
4� Select Group “00�”
5� Select Channel “01�”
L DO NOT push [ENT]�
6� Push [QUICK]�
7� Select “Insert�”
• Beeps sound, a blank channel is inserted above the
selected channel�
L If you select channel 99 in step 5, a confirmation
dialog is displayed� When you select “YES,” channel
99 is deleted�
TIP: To insert a blank group
On the Memory Group screen, select a group and
push [QUICK], then select “Insert Group�”
• A blank group is inserted above the selected group�
To Next Page
Loading...
