10
SCAN OPERATION
10-10
Memory Scan
DSetting the Group Link
You can sequentially scan the memory groups which
are set to link on the MENU screen�
L In the default setting, all groups are set to link�
[MENU] > SET > Scan > Group Link
1� Push [MENU]�
2� Select “Scan” in the “SET” menu�
3� Select “Group Link�”
4� Select a group, “00” ~ “99,” “S: SKIP CH�”
5� Push [ENT] to turn the Link function ON or OFF�
• “ ” is displayed when the function is set to “ON�”
L Push [QUICK] to quickly turn all the groups ON or
OFF�
L To exit the MENU screen, push [MENU]�
DAbout a Group scan name
When a group name is entered to a Memory channel
group, the name is displayed in the Scan Type Select
window� (p� 10-9)
L The name is not displayed during a scan�
L To enter the name, see page 9-11�
When the Group name is entered
When the Group name is not entered
To Next Page
Loading...
