15
OTHER FUNCTIONS
15-6
Transmitting the DTMF code
DTransmitting the entered DTMF code
[MENU] > SET > DTMF/T-CALL > DTMF Memory
1� Push [MENU]�
2� Select “DTMF/T-CALL” in the “SET” menu�
3� Select “DTMF Memory�”
4� Select a DTMF Memory to transmit�
• The selected DTMF channel is set to transmit�
5� Push [MENU]�
• Exits the MENU screen�
6� While holding down [PTT], push [SQL]�
• The selected DTMF code in step 4 is transmitted�
• Even if you release [PTT], the transceiver keeps
transmitting the code until all the code is transmitted�
TIP: In the standby screen, you can transmit a
DTMF code by pushing [QUICK], selecting “DTMF
TX,” and selecting a code�
D Transmitting a DTMF code (Direct Input)
1� Push [QUICK]�
2� Select “DTMF TX�”
3� Select “Direct Input�”
4� Enter a DTMF code, then push [ENT]�
(Example: 012345#)
• Transmits the entered DTMF code�
L The DTMF code scrolls during transmission�
L See page iii on how to enter characters�
TIP: About the 1750 Hz tone
When you select “T-CALL” on the DTMF MEMORY
screen, a 1750 Hz tone can be transmitted�
While holding down [PTT], push [SQL]�
• The 1750 Hz tone is transmitted�
L You can hear the 1750 Hz tone from a speaker�
To Next Page
Loading...
