5
D-STAR OPERATION (ADVANCED)
5-9
“TO” (Destination) setting
DMaking the “Local CQ” (Local Area
call)
When “Local CQ” is selected on the TO SELECT
screen, “CQCQCQ” is set in “TO�”
Example: Making a Local area call by accessing the
“Kirkland (IA)” repeater�
1� Hold down [DR] for 1 second to display the DR
screen�
2� Push D-pad() to select “TO,” and then push [ENT]�
3� Select “Local CQ�”
• Returns to the DR screen, and “CQCQCQ” is
displayed in “TO�”
D Making a “Gateway CQ” (Gateway call)
When “Gateway CQ” is selected on the TO SELECT
screen, you can select the repeater to make a
gateway call to�
Example: Making a Gateway CQ call to the “Hirano”
repeater from the “Kirkland (IA)” repeater�
1� Hold down [DR] for 1 second to display the DR
screen�
2� Push D-pad() to select “TO,” and then push [ENT]�
3� Select “Gateway CQ�”
4� Select the repeater group where your destination
repeater is listed�
5� Select the destination repeater�
L Each repeater has a correct node (A, B, or C band)
that you want to transmit on� See page 5-2,
“IMPORTANT” for band letter details�
• Returns to the DR screen, and the selected repeater
name is displayed in “TO�”
TIP: After selecting a destination repeater, you can
select another repeater preset in your repeater List
by rotating [DIAL]�
To Next Page
Loading...
