12
SET MODE
12-36
Others
Voltage
[MENU] > SET > Others > Information > Voltage
Displays the voltage of the battery pack and external
power source�
L When you attach the Li-ion battery pack, the charge
status of the battery pack and the battery voltage are
displayed�
L When you attach the optional battery case, the battery
case’s terminal voltage is displayed�
Version
[MENU] > SET > Others > Information > Version
Displays the transceiver firmware’s version number�
Clone Mode
[MENU] > SET > Others > Clone > Clone Mode
Enters the clone mode to read or write the CS-52 data
from or to the PC�
L Restart the transceiver to cancel the clone mode�
Partial Reset
[MENU] > SET > Others > Reset > Partial Reset
Resets operating settings to their default values (VFO
frequency, VFO settings, menu contents)�
L See page 15-18 for details�
All Reset
[MENU] > SET > Others > Reset > All Reset
Clears all data and returns all settings to their factory
defaults�
Memory channel contents, Repeater list, and so on
will all be cleared, so you will need to rewrite your
operating settings�
L See page 15-18 for details�
To Next Page
Loading...
