Icom ID-52A

12
SET MODE
12-31
SD Card
Date (Default: mm/dd/yyyy)
[MENU] > SET > SD Card > Import/Export >
CSV Format > Date
Selects the date format between “yyyy/mm/dd,”
“mm/dd/yyyy,” and “dd/mm/yyyy�”
(y: year, m: month, d: day)
L The default value may differ, depending on the
transceiver version�
Opening Picture
[MENU] > SET > SD Card > Opening Picture
Selects the picture that is displayed at power ON�
L See page 15-15 for details�
SD Card Info
[MENU] > SET > SD Card > SD Card Info
Displays the microSD card capacity and the time
remaining for voice recording�
Screen Capture View
[MENU] > SET > SD Card > Screen Capture View
Displays the selected screen capture�
TX/RX Picture View
[MENU] > SET > SD Card > TX/RX Picture View
Displays the pictures that are saved on the microSD card�
L The transceiver cannot display the picture while
transmitting picture data�
L The transceiver can display up to 500 pictures�
Firmware Update
[MENU] > SET > SD Card > Firmware Update
Displays the Firmware Update mode�
Format
[MENU] > SET > SD Card > Format
Formats the microSD card�
If you use a brand new microSD card, be sure to
format it in the transceiver�
Unmount
[MENU] > SET > SD Card > Unmount
Unmounts the microSD card�
Before you remove a card when the transceiver is ON,
be sure to electrically unmount it� Otherwise, the data
may be corrupted or deleted�
Load Setting
[MENU] > SET > SD Card > Load Setting
Selects the saved data file to load�
Save Setting
[MENU] > SET > SD Card > Save Setting
Saves the setting data onto a microSD card�
Save Form (Default: Now Ver)
[MENU] > SET > SD Card > Save Form
Selects the format to save the settings to a microSD
card�
• Now Ver: Saves the settings in the current
version format�
• Old Ver (x�xx - x�xx):
Saves the settings in an older version
format indicated in the parenthesis
(x�xx = version)�
L If you select “Old Ver (x�xx - x�xx),” a function that is
added when the transceiver’s firmware format is updated
will not be saved�
L You cannot load a setting file that is saved in the current
version format to an earlier firmware version�
Import
[MENU] > SET > SD Card > Import/Export > Import
Import the Memory channel contents, Radio memory
contents, UR call sign, repeater list, or GPS memory
data in the CSV format file�
Export
[MENU] > SET > SD Card > Import/Export > Export
Export the Memory channel contents, Radio memory
contents, UR call sign, repeater list, or GPS memory
data in the CSV format file�
Separator/Decimal (Default: Sep[,] Dec[�])
[MENU] > SET > SD Card > Import/Export >
CSV Format > Separator/Decimal
Selects the separator and the decimal character for
the CSV format�
L The default value may differ, depending on the
transceiver version�
• Sep [,] Dec [�]: Separator is “,” and Decimal is “�”
• Sep [;] Dec [�]: Separator is “;” and Decimal is “�”
• Sep [;] Dec [,]: Separator is “;” and Decimal is “,”