12
SET MODE
12-13
SPEECH
RX Call Sign SPEECH (Default: ON (Kerchunk))
[MENU] > SET > SPEECH > RX Call Sign SPEECH
Turns the RX Call Sign Speech function ON or OFF
for calls received in the DV mode�
L Information
• When the Digital Squelch function is used, the calling
station’s call sign is not announced if the received signal
is not addressed to your call sign, or does not include a
matching digital code�
• When you receive a signal from a repeater (“UR?” or
“RPT?”), the caller station’s call sign is not announced�
• While scanning, the transceiver resumes the scan during
an announcement�
• Even if a note is entered after the call sign, it is not
announced�
• When you receive a signal during an announcement, the
transceiver cancels the announcement, and you can hear
the received audio�
• OFF: The caller station’s call sign is not
announced, even when a call is
received�
• ON (Kerchunk): The caller station’s call sign is
announced only when they make a
quick transmission�
• ON (All): The caller station’s call sign is
always announced�
RX>CS SPEECH (Default: ON)
[MENU] > SET > SPEECH > RX>CS SPEECH
Turns the RX>CS Speech function ON or OFF�
The RX>CS Speech function announces the station
call sign that is selected from a Received Call Record
L If a call is received during an announcement, the received
audio is muted, and the audio is not recorded onto the
microSD card�
• OFF: The station call sign is not announced�
• ON: The station call sign is announced�
DIAL SPEECH (Default: OFF)
[MENU] > SET > SPEECH > DIAL SPEECH
Turns the Dial Speech function ON or OFF�
The Dial Speech function announces the frequency or
repeater call sign that is selected by rotating [DIAL]�
L When using the DR function, the frequency is announced
if the Simplex mode is selected or the FM repeater does
not have a call sign�
L When you receive a signal during an announcement, the
transceiver cancels the announcement, and you can hear
the received audio�
• OFF: The frequency or repeater call sign is not
announced�
• ON: The frequency or repeater call sign is
announced, 1 second after rotating [DIAL]�
In the VFO, Memory, or Call Channel mode,
the frequency is announced�
When using the DR function, the repeater call
sign is announced�
MODE SPEECH (Default: OFF)
[MENU] > SET > SPEECH > MODE SPEECH
Turns the operating mode announcement ON or OFF�
L During a VFO scan, the operating mode is announced
when you change the mode�
• OFF: The selected operating mode is not
announced�
• ON: The selected operating mode is announced�
SPEECH Language (Default: English)
[MENU] > SET > SPEECH > SPEECH Language
Sets the speech language to English or Japanese�
Alphabet (Default: Normal)
[MENU] > SET > SPEECH > Alphabet
Selects the type of phonetic announcement�
• Normal: Normal code is used�
(Example: A as eh, B as bee)
• Phonetic Code: The Phonetic code is used�
(Example: A as Alfa, B as Bravo)
To Next Page
Loading...
