Icom ID-52A

12
SET MODE
12-2
You can open the MENU screen by pushing [MENU]�
You can use the MENU screen to set infrequently
changed values or function settings�
In addition to this page, see pages 12-4 through 12-36
for details of each item’s options and default values�
DMENU screen operation
Selecting an item
Selects an item or option�
Goes to the previous
tree level�
Switches between the
MENU screen and
the standby screen�
[ENT]
Sets an option�
Goes to the
previous tree
level�
Goes to the
next tree level�
Returns to the
default setting�
Selects an item or option�
Simplified description—‘Select’ operation
In this manual, the user’s ‘Select’ operation is
simplified, as described below�
Simplified description:
1� Push [MENU]�
2� Select “30min�”
Operation:
1� Push [MENU] to open the MENU screen�
2� Push D-pad() to select “30min,” and then push
[ENT]�
TIP: The MENU screen is constructed in a tree
structure� You may go to the next tree level, or go
back a level, depending on the selected item�