Icom ID-52A

10
SCAN OPERATION
10-11
Memory Scan
DSetting the skip channel
You can set or clear a Skip Channel setting�
The channels that are set as a Skip channel are
skipped during a scan�
1� Push [MR] to enter the Memory mode�
L For only the ID-52A, pushing [MR] each time selects
the Memory and Weather Channel modes�
2� Select the memory channel to be skipped�
3� Push [QUICK]�
4� Select “SKIP�”
5� Select an option�
When a Skip channel is set,
“SKIP” or “PSKIP” is displayed�
• OFF: Cancels the Skip Channel setting�
• SKIP: Skipped during a Memory scan�
• PSKIP: Skipped during both VFO and Memory
scans�
Temporary skip function
This function temporarily skips unwanted frequencies
(or memory channels) during a scan for the set
period of time or condition, without changing the Skip
Channel setting�
1� While a scan is paused, hold down [MW] for 1
second�
2� Select “Temp Skip Set�”
• Sets the frequency or Memory channel as a Skip
Frequency or Channel�
• The scan automatically resumes�
TIP:
• Up to 20 Temporary Skip frequencies or Memory
channels can be set� When the 21st frequency
or Memory channel is set, the oldest setting is
automatically deleted�
• You can also set the Temporary Skip function in the
Quick Menu window�
• The Temporary Skip function is canceled when the
Temporary Skip Timer (Default: 5 min) has passed, or
when selecting “Temp Skip Cancel” in the Quick Menu
window�
([MENU] > SET > Scan > Temporary Skip Timer)