Icom ID-52A

12
SET MODE
12-9
My Station
My Call Sign
[MENU] > SET > My Station > My Call Sign
The transceiver has a total of 6 memories to save
your own call signs for use in the DV mode� You can
enter a call sign of up to 8 digits�
Also, you can enter a note of up to 4 characters, for
operating transceiver type, area, and so on�
L See D-STAR GUIDE in the Basic manual for MY Call Sign
entry�
L To select another My Call Sign, push D-pad() to select
a call sign, and then push [ENT] on the MY CALL SIGN
screen�
TX Message
[MENU] > SET > My Station > TX Message
The transceiver has a total of 5 memories to save
short messages for transmission with your voice
signal in the DV mode�
Enter a message of up to 20 alphanumeric characters
for each memory�
L See page 5-17 for TX message entry�
L To select other TX message, push D-pad() to select
a memory, and then push [ENT] on the TX MESSAGE
screen�
TIP: To transmit no message, select “OFF�”