12
SET MODE
12-14
DTMF/T-CALL
You can set the DTMF tone code and DTMF Memory
channel for DTMF tone operation�
See page 15-5 for details�
DTMF Memory (Default: d0)
[MENU] > SET > DTMF/T-CALL > DTMF Memory
Displays a list of the DTMF Memory channels�
• T-CALL: 1750 Hz tone burst signal
• d0 ~ d#: DTMF memory channel list
DTMF Speed (Default: 100ms)
[MENU] > SET > DTMF/T-CALL > DTMF Speed
Selects the DTMF transmit speed�
• 100ms: Transmits the DTMF codes at about 100
milliseconds per code
(5 characters per second)�
• 200ms: Transmits the DTMF codes at about 200
milliseconds per code
(2�5 characters per second)�
• 300ms: Transmits the DTMF codes at about 300
milliseconds per code
(1�6 characters per second)�
• 500ms: Transmits the DTMF codes at about 500
milliseconds per code
(1 character per second)�
SPEECH Speed (Default: Fast)
[MENU] > SET > SPEECH > SPEECH Speed
Sets the speech speed to Fast or Slow�
SPEECH Level (Default: 7)
[MENU] > SET > SPEECH > SPEECH Level
Sets the Voice Synthesizer audio output level to
between 0 (OFF), 1 (minimum) and 9 (maximum)�
L The voice synthesizer audio output level is linked with the
[VOL] setting from the minimum audio volume up to this
set level�
SPEECH
To Next Page
Loading...
