Icom ID-52A

10
SCAN OPERATION
10-2
DVFO scan
The VFO scan searches for signals within the
specified frequency range�
Full scan (ALL)
Repeatedly scans the entire band�
ID-52A/E
RX frequency
lower end
ID-52A/E
RX frequency
upper end
Scan
Jump
P SKIP
P SKIP
Band scan (BAND)
Repeatedly scans the selected band�
Scan
Jump
PSKIPPSKIP
Band edge frequency
lower end
Band edge frequency
upper end
Program scan (P00 ~ P24)
Repeatedly scans the selected Program Scan range
(P-Scan Edge 00 ~ 24)�
Scan
Jump
Jump
Scan range
Lower edge Upper edge
PSKIPPSKIP
L At least one Program Scan range (P-Scan Edges) must
be entered to start a Program scan�
([MENU] > SET > Scan > P-Scan Edge)
See page 10-7 for more details�
Program Link scan (P-LINK 0 ~ 9)
Sequentially scans the Program Scan ranges� The
links are set on the MENU screen�
([MENU] > SET > Scan > Program Link)
L See page 10-8 for more details�
Program scan edges (Example: P00 ~ P10)
Jump
Scan
P00 P01 P02 P03 P10
DMemory scan
The Memory scan searches signals on the
preregistered memory channels�
ALL scan (ALL)
Repeatedly scans all memory channels�
Memory Groups (00 ~ 99 and S: Skip CH)
00 01 02 98 99 S03
Empty groups are skipped
Jump
Scan
Selected band scan (BAND)
Scans all memory channels on the same frequency
band as the selected channel�
Mode scan (MODE)
Scans memory channels that are entered with the
same operating mode as the currently selected mode�
L The Mode scan scans all memory groups�
(Group 00 ~ 99, S: SKIP CH)
AM FM AM AM AMDV
Scan
Modes other than AM are skipped
Example: Scanning AM mode
Memory group 02
Group link scan (GROUP LINK)
Sequentially scans the memory groups that are set to
link on the MENU screen�
01 02
00
99  S
98
Unchecked groups are skipped
Jump
Scan
Memory Groups (00 ~ 99 and S: Skip CH)
L At least 2 groups must be checked to start a Group Link
scan� ([MENU] > SET > Scan > Group Link)
See page 10-10 for more details�
Group scan (GROUP 00 ~ 99)
Scans the Memory channels in the selected group�
Scan Type
Scanning is a versatile function that can automatically search for signals� A scan makes it easier to locate stations
to contact or listen to, or to skip unwanted channels or frequencies�