12
SET MODE
12-12
DV Set
EMR (Default: OFF)
[MENU] > SET > DV Set > EMR
The Enhanced Monitor Request (EMR) function
enables all transceivers that receive an EMR signal
in the DV mode automatically to open their squelch to
receive the signal�
• OFF: Turns OFF the function�
• ON: Turns ON the function�
L The EMR function is automatically turned OFF when the
transceiver is turned OFF�
EMR AF Level (Default: 19)
[MENU] > SET > DV Set > EMR AF Level
Sets the audio output level when an EMR
communication mode signal is received� When an
EMR signal is received, the audio will be heard at the
programmed level, or the transceiver’s audio level,
whichever is higher�
To disable the setting, set to “0�”
NOTE: After an EMR signal disappears, the audio
level will remain at the EMR level� In this case, rotate
[VOL] to adjust the audio level�
To Next Page
Loading...
