12
SET MODE
12-33
Bluetooth Set
RX Priority Setting (LE Device)
(Default: MAIN Band)
[MENU] > SET > Bluetooth Set > Headset Set >
RX Priority Setting (LE Device)
Selects the communication priority for the DV Fast
Data and receive audio, when connecting an iOS
device (Bluetooth LE (Low Energy)) and a Bluetooth
headset� The Bluetooth LE communication cannot
be simultaneously used for both DV Fast Data and
Headset audio�
L When connecting to an SPP (Serial Port Profile) device
such as a data device or PC, the Bluetooth device
functions according to the “Serialport Function” (p� 12-34)
setting�
• DV Fast Data: Received audio is not output from
the headset, regardless of the band
(MAIN or SUB)�
• RX Audio: DV Fast Data is not transferred
during the received audio is output
from the headset�
• MAIN Band: The audio received on the SUB band
is not output from the headset when
a DV Fast Data is received on the
MAIN band�
DV Fast Data that is received on the
SUB band is not transferred while a
signal is received on the MAIN band�
VOX (Default: OFF)
[MENU] > SET > Bluetooth Set > Headset Set >
VOX > VOX
Turns the Voice Operated Transmission (VOX)
function ON or OFF�
The VOX function starts transmission without pushing
[PTT] when you speak into the microphone, and
then, automatically returns to receive when you stop
speaking�
L To use the VOX function, the optional Bluetooth headset
is required�
• OFF: Turns OFF the function�
• ON: Starts transmission without pushing [PTT]
when you speak into the microphone� Then
automatically returns to receive when you
stop speaking�
VOX Level (Default: 5)
[MENU] > SET > Bluetooth Set > Headset Set >
VOX > VOX Level
Sets the VOX gain level to between 1 and 10, or OFF�
Higher values make the VOX function more sensitive
to your voice�
• OFF: Turns OFF the VOX function�
• 1 ~ 10: 1 (The minimum sensitivity)
10 (The maximum sensitivity)
VOX Delay (Default: 0�5sec)
[MENU] > SET > Bluetooth Set > Headset Set >
VOX > VOX Delay
Sets the VOX Delay time to 0�5, 1�0, 1�5, 2�0, 2�5 or
3�0 seconds� The VOX Delay is the amount of time the
transmitter stays ON after you stop speaking, before
the VOX switches to receive�
VOX Time-Out Timer (Default: 3min)
[MENU] > SET > Bluetooth Set > Headset Set >
VOX > VOX Time-Out Timer
Sets the VOX Time-Out Timer to prevent an accidental
prolonged transmission� To disable the function, set to
“OFF�”
• OFF: Turns OFF the function�
• 1, 2, 3, 4, 5, 10, or 15min:
If a continuous transmission exceeds the set
period of time, the transmission is cut off�
To Next Page
Loading...
