Icom ID-52A

15
OTHER FUNCTIONS
15-17
Cloning
Step 3. Loading the setting data into the sub
transceiver.
[MENU] > SET > SD Card > Load Setting
1� Push [MENU]�
2� Select “SD Card” in the “SET” menu�
3� Select “Load Setting�”
4� Select a data file to load into the transceiver�
5� Select the loading content�
• ALL:
Loads all Memory channels, settings on the MENU
screen, and the Repeater List into the transceiver�
• Except My Station:
Loads all Memory channels, setting on the MENU
screen except MY call signs, and the Repeater List
into the transceiver�
• Repeater List Only:
Loads only the Repeater List into the transceiver�
6� Select “YES” or “NO�”
• YES:
The skip settings of the Repeater List are retained�
(p� 5-39)
• NO:
The skip settings of the Repeater List are cleared�
7� Select “YES�”
• Starts checking and loading the data file�
• After loading, “COMPLETED!” is displayed�
8� Restart the transceiver to operate with the new
setting�