Icom ID-52A

16
UPDATING THE FIRMWARE
16-3
DPreparation
Access the following URL and download the firmware
file�
https://www.icomjapan.com/support/
L These instructions are based on Microsoft
®
Windows
®
10�
1� Click the “Firmware/Software” link�
Click
2� Enter “ID-52” into the Search box, and then click
[Search]�
3� Click the desired firmware file link�
4� Carefully read “Regarding this Download Service�”
Click “Agree,” and then click [Download]�
5� Click “Save as” in the displayed File Download
dialog�
6� Select the location where you want to save the
firmware, and then click [Save] in the displayed
File Download dialog�
Click
• The file starts downloading�
• The firmware and the firm utility are compressed in a
“zip” format folder� Unzip it before use�
General
2Click
1Enter
2Click
1Click
DUnzipping the firmware folder
1� Right-click the downloaded firmware folder (zip
format)�
• The right-click menu is displayed�
2� Click “Extract All���”
Click
• After unzipping, a folder is created in the same
location as the downloaded folder�
L In the “52*” folder, “52*�dat” is created�
* Represents the release number�