Icom ID-52A

INTRODUCTION
v
HOW TO ENTER TEXT
Example: Entering “Calling” as a Memory name.
[MENU] > MEMORY > Memory CH
1. Push [MENU].
2. Select “MEMORY” on the second page of the
MENU screen.
3. Select “Memory CH.”
4. Select a channel group where the memory
channel you want to edit is listed.
5. Rotate [DIAL] to select a Memory channel.
6. Push [QUICK].
7. Select “Edit.”
• The Edit screen is displayed.
8. Select “NAME.”
9. Push [QUICK].
10. Select the character type.
L To enter symbols, select “!"#.”
11. Rotate [DIAL] to select a character, then push [ENT].
L Information
• To move the cursor forward, push D-pad().
• To move the cursor backward, push D-pad().
• To insert a character, move the cursor to a place to
enter, then rotate [DIAL].
• To clear a character, push [CLR].
• To consecutively clear characters, continuously hold
down [CLR].
• When the character type is “ABC” or “abc,” and while
entering a character, push [QUICK] to select upper
case or lower case letters.
12. Repeat steps 9 ~ 11 to enter a name, and push [ENT].
• Returns to the Edit screen, and the entered name is
displayed.
13. Select “<<OverWrite>>.”
• A confirmation dialog is displayed.
14. Select “YES.”
• The Memory name is overwritten.