Icom ID-52A

5
D-STAR OPERATION (ADVANCED)
5-35
Entering new information into the repeater list
Step 17. Entering the longitude
L This item is displayed only when Step 15.
Selecting the position data accuracy level is set
to “Approximate” or “Exact�”
1� Select “LONGITUDE�”
2� Rotate [DIAL] to enter the longitude�
L Push D-pad() to move the cursor�
L To enter an east longitude, select “E,” and to enter a
west longitude, select “W�”
3� After entering, push [ENT]�
Step 18. Setting the UTC offset
L Universal Time Coordinated (UTC) offset is the time
difference between UTC and repeater local time�
This is a useful function to know the repeater’s local
time before you make a call� (p� 5-13)
1� Select “UTC OFFSET�”
2� Rotate [DIAL] to set the time difference between
UTC and the local time, then push [ENT]�
D Entering new information into the repeater list
Step 19. Saving the repeater list
1� Select “<<Add Write>>�”
• The confirmation dialog is displayed�
2� Select “YES�”
• The entered contents are saved to the repeater list,
and the display returns to the selected repeater group
screen�
TIP: To cancel the entered data
1� Push [CLR] to display the “Cancel edit?” window�
2� Select “YES�”
• Cancels the entry and returns to the selected
repeater group screen�