Intermec EasyCoder PM4i User Manual

Chapter 9 — Options
84 EasyCoder PM4i Printer User’s Guide (Fingerprint Version)
Introduction
The EasyCoder PM4i provides a high degree of flexibility
because it has a modular design. By adding options to the basic
printer, the EasyCoder PM4i can be adapted for a variety of
applications. Most options should be installed by an authorized
service technician or are only available as factory-installed
options.
Side door
with keylock
Interface boards
(various types)
Cover
1.5-inch
rotating
supply hub
3-inch
adapter
Media roll
retainer
Special
printheads
Fan-fold
guide
Cutter
tray
Paper
cutter
Label
taken
sensor
Paper
sensor
Liner takeup
unit with
guide shaft

Intermec EasyCoder PM4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.5/8.7 mm
Maximum label width	114.3 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	15 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	543 mm
Width	298 mm
Height	261 mm
Weight	13500 g