Intermec EasyCoder PM4i User Manual

Appendix E — Setup Mode Overviews
EasyCoder PM4i Printer User’s Guide (Fingerprint Version) 167
Setup Mode; RFID (option)
(Intermec Fingerprint v8.70)
Continued on
the next page
C
ontinued
f
rom th
e
previous pag
e
Continued from the
previous page
SETUP:
RFID
RFID:
MODE
RFID:
VOIDTEXT
RFID:
RETRIES
MODE:
ENABLE
VOIDTEXT:
[VOID]:
RETRIES:
[1]:
TAGADJUST:
[0]:
Read-Only
RFID:
TAGADJUST
MODE:
DISABLE
RFID:
FIELDSTRENGTH
FIELDSTRENGTH:
[100]:

Intermec EasyCoder PM4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.5/8.7 mm
Maximum label width	114.3 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	15 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	543 mm
Width	298 mm
Height	261 mm
Weight	13500 g