Intermec EasyCoder PM4i User Manual

Appendix B — Media Specifications
EasyCoder PM4i Printer User’s Guide (Fingerprint Version) 133
Self-Adhesive Strip
⇐ a ⇒ Media Width (including liner)
⇐ b ⇒ Liner
The liner must not extend more than a total of 1.6 mm (0.06 in)
outside the face material and should protrude equally on both
sides.
⇐ c ⇒ Media Width (excluding liner)
Media Type Setup
•Fix length strip
•Var length strip
Maximum: 114.3 mm (4.50 in)
Minimum: 25.0 mm (1.00 in)
Maximum: 112.7 mm (4.43 in)
Minimum: 23.8 mm (0.94 in)

Intermec EasyCoder PM4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.5/8.7 mm
Maximum label width	114.3 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	15 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	543 mm
Width	298 mm
Height	261 mm
Weight	13500 g