EasyCoder PM4i Printer User’s Guide (Fingerprint Version) 21
4
Media Load
This chapter explains how to load the printer with media, that is
labels, tickets, tag, or strips, for the following modes of operation:
• Tear-Off (straight-through)
• Peel-Off (self-strip), requires optional integral self-strip unit
with liner takeup
• Cut-Off (requires optional cutter)
• External supply (fanfolds), fanfold guide available as option
Note: For information on how to load the printer with RFID
media, please refer to the documentation that came with your
RFID kit.
To Next Page
Loading...
