Intermec EasyCoder PM4i User Manual

Chapter 2 — Installation
12 EasyCoder PM4i Printer User’s Guide (Fingerprint Version)
The printer scans all communication ports. When it detects
incoming data on a port, the printer automatically switches to
use that port for both input and output. This facility ("auto") can
be selected in Intermec Shell (see Chapter 8) or using the
Intermec Fingerprint instruction SETSTDIO, see Intermec
Fingerprint Command Reference Manual (P/N 937-005-
XXX). Use the F5/i key to get information on the active
communication channels.
Switch off both PC and printer before connecting them together.
Controls and Indicators
The EasyCoder PM4i has several ways of communicating directly
with its operator: three colored indicator lamps, a display
window, a membrane-switch keyboard with 23 programmable
keys and buttons on the printer’s front, and a beeper.

Intermec EasyCoder PM4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.5/8.7 mm
Maximum label width	114.3 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	15 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	543 mm
Width	298 mm
Height	261 mm
Weight	13500 g