Intermec EasyCoder PM4i User Manual

Appendix D — Intermec Supplies
148 EasyCoder PM4i Printer User’s Guide (Fingerprint Version)
RFID Media
Intermec offers a wide variety of RFID media suitable for
different applications. Visit the Intermec website or contact your
Intermec representative to find the RFID media best suited to
your needs.
Direct Thermal Media
Intermec offers two quality grades of direct thermal media for the
Easy-Coder printers:
Premium Quality
Top-coated media with high demands on printout quality and
resistance against moisture, plasticizers, and vegetable oils.
Examples:
Europe North America
Thermal Top Board Duratherm II
Thermal Top Duratherm II Tag
Thermal Top High Speed Duratherm Lightning
Duratherm Lightning Plus
Duratherm IR
Economy Quality
Non top-coated media with less resistance to moisture,
plasticizers, and vegetable oils. In all other respects, it is equal to
Premium Quality.
Examples:
Europe North America
Thermal Eco –
Thermal Eco Board

Intermec EasyCoder PM4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.5/8.7 mm
Maximum label width	114.3 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	15 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	543 mm
Width	298 mm
Height	261 mm
Weight	13500 g