Intermec EasyCoder PM4i User Manual

Appendix C — Interfaces
EasyCoder PM4i Printer User’s Guide (Fingerprint Version) 143
For more demanding applications or for reading bar codes other
than Code 128, choose a regular bar code scanner from
Intermec’s wide product range and connect it to a serial port.
Optional Interfaces
The printer can optionally be fitted with an one or two of the
following Interface Boards at the right-hand side of the printer’s
rear plate.
• Double Serial Interface Board
• Serial/Industrial Interface Board
• IEEE 1284 Parallel Interface Board (only one at a time)
• RFID Option Board (available as spare part only, as part of
RFID kit)
Regardless of if any Interface Board is installed, the printer can
also be fitted with one
of the following EasyLAN interface boards
for connection to a Local Area Network (LAN):
• EasyLAN Ethernet Interface
• EasyLAN Wireless Interface
Bar code wand
interface (”wand:”)

Intermec EasyCoder PM4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.5/8.7 mm
Maximum label width	114.3 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	15 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	543 mm
Width	298 mm
Height	261 mm
Weight	13500 g