Intermec EasyCoder PM4i User Manual

Chapter 2 — Installation
EasyCoder PM4i Printer User’s Guide (Fingerprint Version) 15
Beeper
The beeper notifies the operator when an error has occurred and
acknowledges that a key has been pressed. The Intermec
Fingerprint programming language allows the key acknowledge
signal to be turned off. The frequency and duration of signals can
be specified. Thus, it is possible to create different signals for
different conditions or even to make the printer play simple
melodies!
Keyboard Color Code
Yellow Operation of the printer (operator level)
Green Setup or service (site or service technician
level)
White Data input to printer (operator or
technician level)

Intermec EasyCoder PM4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.5/8.7 mm
Maximum label width	114.3 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	15 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	543 mm
Width	298 mm
Height	261 mm
Weight	13500 g