iPECS LIP-9070 - 5.5 iPECS Phone Call Settings

LIP-9070 iPKTS User Guide
22
 Conf: initiate a voice conference.
 Mute/Unmute: turn the microphone on or off, to control the speakerphone, handset or wired headset
microphone.
Note
° The video call supports multiple video codecs including {H.264, H.263 and, MPEG}. The codec for a given
call is negotiated between the devices.
° The LIP-9070 video call function requires below bandwidth based on the codec employed.
- H.263: 768kbps
- H.264/MPEG: max=2048kbps, min=384kbps, typical target = 768kbps
5.5 iPECS Phone Call Settings
The Call Settings for the iPECS Phone impacts call
handling, button appearance, sounds and other
characteristics of the phone. To view the Call Settings
menu,
1. While on the iPECS phone screen, touch the
Menu button.
2. Select the Call Settings icon.
The Call Settings menu includes,
 Preferences: section 5.5.1, set signaling and
answer for internal calls, configure wired
headset operation, etc.
 Flexible Button Name: section 5.5.2, assign a
name or label for each Flex button.
 Phone Management: section 5.5.3; manage
characteristics of the phone including the
name, password, etc.
 Sound: section 5.5.4, select the ringtone for
incoming internal and external calls.
 System Configuration: section 5.5.5, assigns
the iPECS system IP address and the
connection mode.
 Reboot: section 5.5.6, restart the LIP-9070
phone.