iPECS UCP100 - Page 237

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
223
Table 4.4.6.3-2ACD GROUP ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
CIQ #1 Page Alert
-Delay Time
Delay timer for CIQ #1 Announcement
000-180
015
CIQ #1 Page Alert
-Repeat Time
Interval for repeating the CIQ #1 Announcement.
000-180
045
CIQ #2 Page Alert
-Threshold
If the queued call count exceeds the threshold, the system plays
the CIQ #2 Announcement to the CIQ #2 Page Zone after the
CIQ #2 Announcement Delay Timer. The announcement is
repeated at intervals of the CIQ #2 Announcement Repeat
Timer.
00-99
20
CIQ #2 Page Alert
-Announcement
Location
VSF announcement number for the CIQ #2 Announcement.
00-200
0
CIQ #2 Page Alert
– Page Zone
Page Zone to receive CIQ #2 Announcement.
eMG80/100:00~15 or00-40, eMG800:0~105, UCP:0~105
Refer to
description
00
CIQ #2 Page Alert
-Delay Time
Delay timer for CIQ #2 Announcement
000-180
015
CIQ #2 Page Alert
-Repeat Time
Interval for repeating the CIQ #2 Announcement.
000-180
025
CIQ #3 Page Alert
-Threshold
If the queued call count exceeds the threshold, the system plays
the CIQ #3 Announcement to the CIQ #3 Page Zone after the
CIQ #3 Announcement Delay Timer. The announcement is
repeated at intervals of the CIQ #3 Announcement Repeat
Timer.
00-99
30
CIQ #3 Page Alert
-Announcement
Location
VSF announcement number for the CIQ #3 Announcement.
00-200
0
CIQ #3 Page Alert
– Page Zone
Page Zone to receive the CIQ #3 Announcement.
eMG80/100:00~15 or00-40, eMG800:0~105, UCP:0~105
Refer to
description
00
CIQ #3 Page Alert
-Delay Time
Delay timer for the CIQ #3 Announcement
000-180
015
CIQ #3 Page Alert
-Repeat Time
Interval for repeating the CIQ #3 Announcement.
000-180
005
Forced Forward
Destination
Calls to a Station group may forward directly to a defined
destination, bypassing the hunt process. “Forced Forward,”
below, must be enabled.
 STA/NET or Station group,
 VSF Announcement,
 Sys. Speed
Refer to
description
Forced Forward
Dest. Usage
Calls to a Station group may forward directly to a defined
destination. See above “Forced Forward Destination” when
Forced Forward is enabled for the group.
OFF
ON
OFF