iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
217
Table 3.3.7.2-3 STATION GROUP ATTRIBUTES — RING GROUPS (PGM 191)
RING 405 OVERFLOW DEST
S/H/V/SPD (Dial 1-4)
A call to the group rings at member stations
until the Overflow timer expires, then the
call passes to the assigned Overflow
Destination.1:Station, 2:Station group,
3:VSF Announce, 4:System speed
RING 405 OVERFLOW TMR
(000 - 600) : 180
A call to a ring group will continue to ring
stations in the group or be sent to the
assigned Overflow Destination after the
expiration of the OVERFLOW Timer.
RING 405 WRAP-UP TMR
(000 - 999) : 002
After terminating any call, a Ring Group
member will be maintained in a busy state
for the duration of the WRAP-UP Timer.
RING 405 MUSIC SRC
(00–37) : 01
A Music source is assigned so that calls to
the group will receive audio from the
assigned source in place of ring-back tone.
00: Ring-back
01: Int music
02: Ext music
03: VSF MOH
04~08: SLTMOH1~5
09~37: VSFMOH2~30
RING 405 MAX QUE C-CNT
(00-99) : 99
When the number of calls queued is
reached, new calls will receive an error
tone and be disconnected after the VSF AA
announcement, if assigned, is played.
RING 405 MBR FORWARD
(1 : ON/ 0: OFF) : ON
A member activating Call Forward may be
placed in an unavailable state for hunt
group calls (ON). When OFF, group calls
are sent to the member as normal.
MAILBOX MSG WAIT STA
. . . .
When a group calls overflows or routes to
the VM group, a station number is used to
identify the Mailbox for the Ring group
messages.
The password associated with a group
Mailbox is defined here. The password is
used in conjunction with the Ring group as
with a normal station.
RING 405 FORCED DEST
S/H/V/SPD (DIAL 1-4)
When a call is delivered to the group, the
system can redirect the call to the Forced
destination if enabled under button 16
below.
1:Station, 2:Station group
3:VSF Announce, 4:System speed
To Next Page
Loading...
