ITech IT8200 Series

ARB Subsystem
Copyright © ITECH Electronic Co., Ltd. 89
Returns:
<NRf+>
Example
LIST:STEP:JUMP 2
LIST:FUNCtion <CPD>
This command is used to set list running mode. Such as CC mode or CR mode.
Syntax:
LIST:FUNCtion <CPD>
Arguments
AC mode: CC|CR
DC mode: CC|CR|CP
Query syntax:
LIST:FUNCtion?
Example
LIST:FUNCtion CC
LIST:DCCV:STATe <Boolean>
This command is used to set CV state of DC list mode.
Syntax:
LIST:DCCV:STATe <Boolean>
Arguments
<0|1|OFF|ON>
Query syntax:
LIST:DCCV:STATe?
Example
LIST:DCCV:STAT 0
LIST:DCCV:VOLTage <NRf+>
This command is used to set Voltage level of CV in DC List mode.
Syntax:
LIST:DCCV:VOLTage <NRf+>